STEP 1:
1.5سینٹی میٹر سیون الاؤنس شامل
تمام پیٹرن ٹکڑے ٹکڑے کاٹ. The CUFFS will sew better if made from jersey.
Fold the LEG CUFFS in half lengthways. Match the raw edges of one with those of FRONT 1, ایک دوسرے کے ساتھ دائیں اطراف.
جگہ میں پن اور سلائی. سامنے کے لئے دہرائیں 2.
اس منصوبے بھر آڑے ترچھے سلائی یا دوسرے ٹکڑے سلائی استعمال کریں. اس کے علاوہ ایک بال پوائنٹ جرسی مشین انجکشن استعمال کرنے کی بات کا یقین.
STEP 2:
With FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.
جگہ میں پن.
STEP 3:
پوشیدہ سامنے 1 & 2 واپس کے ساتھ ایک دوسرے کے ساتھ دائیں اطراف. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.
Stitch in place. Repeat for the opposite side.
STEP 4:
Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.
Skip to step 10 for neck warmer or step 13 for hood.
STEP 5:
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, ایک دوسرے کے ساتھ دائیں اطراف.
Pin and stitch in place and finish the seam allowance.
STEP 6:
Apply the HEM CUFF to the garment hem, ایک دوسرے کے ساتھ دائیں اطراف.
Ease around evenly then pin and stitch in place.
Finish the seam allowance.
STEP 7:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
STEP 8:
Sew the raw edges together.
STEP 9:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. پن اور سلائی.
STEP 10:
ایک دوسرے کے ساتھ ہڈ ٹکڑوں دائیں اطراف پوشیدہ. Pin and stitch around the outside seam line.
STEP 11:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
STEP 12:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.