GET THE CLEOPATRA PYJAMA PDF PATTERN HERE
BƯỚC CHÂN 1:
Lấy cuff HEM, fold it in half lengthways and stitch the short seam allowance to form a complete loop.
Repeat this step for the NECKLINE CUFF.
BƯỚC CHÂN 2:
Gấp SLEEVE cuff trong nửa cùng chiều rộng của nó. Match the raw edges of the folded CUFF to the SLEEVE.
Ease (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. Pin và khâu.
Repeat for the BACK LEGS.
BƯỚC CHÂN 3:
Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.
Pin và khâu tại chỗ.
BƯỚC CHÂN 4:
Match the FRONT to the front side of the SLEEVE. Pin và khâu như trước.
BƯỚC CHÂN 5:
Với sự may MẶT WRONG ra, đặt MẶT TRƯỚC và MẶT SAU PHẢI với nhau.
Ghim, khâu, cắt và hoàn thiện từ TAY ÁO đến viền dọc theo đường may bên.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary
Lặp lại Bước 2-5 cho phía bên kia của hàng may mặc.
BƯỚC CHÂN 6:
Fold the BACK LEGS in half aligning the seam allowances. Pin và khâu.
BƯỚC CHÂN 7:
Match the raw edges of the BACK LEG with the leg opening on the FRONT and BACK pieces. Match the marks. The mark at the BACK LEG central seam line matches to the lower FRONT.
Half of the BACK LEG remains unsewn and becomes part of the hemline.
Pin và khâu.
BƯỚC CHÂN 8:
Skip to Step 11 if you are using the NECK WARMER or Step 14 for the NECKLINE CUFF.
Ướm tấm HOOD bên phải cùng nhau. Pin and stitch around the outside seam line.
BƯỚC CHÂN 9:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
BƯỚC CHÂN 10:
Overlap the two seam allowances of the HOOD CUFF so one is behind then other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.
BƯỚC CHÂN 11:
Fold the NECK WARMER CUFF in half along the centre fold line.
BƯỚC CHÂN 12:
Sew the raw edges together.
BƯỚC CHÂN 13:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin và khâu.
BƯỚC CHÂN 14:
Match the centre back and front of the NECKLINE CUFF with that of the main garment.
Ease the NECKLINE CUFF around the neckline opening on the garment. Pin và khâu.
BƯỚC CHÂN 15:
Find the centre back and front of the HEM CUFF and that of the main garment hem. Mark with pins.
Lấy cuff HEM. Fold in half and align the raw seam allowances to that of the lower edge of the pyjama, beginning by matching the centre front and back marks. Pin và giảm bớt nó trên khi bạn đi xung quanh. Kết thúc phụ cấp đường may.