BƯỚC CHÂN 1:
1.5phụ cấp cm đường may bao gồm
Cắt tất cả các mảnh mô hình. The CUFFS will sew better if made from jersey.
Fold the LEG CUFFS in half lengthways. Match the raw edges of one with those of FRONT 1, Bên phải cùng nhau.
Pin và khâu tại chỗ. Lặp lại cho TRƯỚC 2.
Sử dụng khâu zig-zag hoặc khâu căng khác trong suốt dự án này. Cũng đảm bảo để sử dụng một máy kim bi jersey.
BƯỚC CHÂN 2:
With FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.
Pin tại chỗ.
BƯỚC CHÂN 3:
TRƯỚC Lay 1 & 2 Bên phải cùng với TRỞ LẠI. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.
Stitch in place. Repeat for the opposite side.
BƯỚC CHÂN 4:
Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.
Skip to step 10 for neck warmer or step 13 for hood.
BƯỚC CHÂN 5:
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Bên phải cùng nhau.
Pin and stitch in place and finish the seam allowance.
BƯỚC CHÂN 6:
Apply the HEM CUFF to the garment hem, Bên phải cùng nhau.
Ease around evenly then pin and stitch in place.
Kết thúc phụ cấp đường may.
BƯỚC CHÂN 7:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
BƯỚC CHÂN 8:
Sew the raw edges together.
BƯỚC CHÂN 9:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin và khâu.
BƯỚC CHÂN 10:
Ướm tấm HOOD bên phải cùng nhau. Pin and stitch around the outside seam line.
BƯỚC CHÂN 11:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
BƯỚC CHÂN 12:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.