Penny Sweater for Sphynx Tutorial

Penny Sweater for Sphynx Tutorial

The Tailoress PDF Sewing Patterns - Penny Sweater for Sphynx Tutorial

Hình ảnh có sẵn trong các mẫu tải về.

READ THE PRINTING INSTRUCTIONS BEFORE PRINTING WWW.THE-TAILORESS.COM/PRINTING-INSTRUCTIONS
1.5phụ cấp cm đường may bao gồm

Cắt tất cả các mảnh mô hình.
Gấp SLEEVE cuff trong nửa cùng chiều rộng của nó. Match the raw edges of the folded CUFF to the SLEEVE.

Ease (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. Pin và khâu.

Take the HEM CUFF and NECKLINE CUFF (refer to Step 5 if you are using the NECK WARMER CUFF) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.

Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.

Pin và khâu tại chỗ.

Match the FRONT to the front side of the SLEEVE. Pin và khâu như trước.

Lặp lại Bước 3-4 cho phía bên kia của hàng may mặc.

Đặt mặt trước và sau QUYỀN bên cùng nhau, pin from the side seam from the SLEEVE CUFF down to the garment hem.

Stitch và kết thúc phụ cấp đường may.

Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary

Apply the HEM CUFF to the garment hem, Bên phải cùng nhau. Match the centre front and back points.

Ease around evenly then pin and stitch in place.

Kết thúc phụ cấp đường may.

Skip to Step 10 if you are using the NECK WARMER or Step 13 for the NECKLINE CUFF.

Ướm tấm HOOD bên phải cùng nhau. Pin and stitch around the outside seam line.

Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.

Overlap the two seam allowances of the HOOD CUFF so one is behind then other. Apply the centre of the HOOD CUFF to the centre front of the garment.

Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.

Fold the NECK WARMER CUFF in half along the centre fold line.

Sew the raw edges together.

Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.

Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin và khâu.

WITH NECKLINE CUFF
Fold the NECKLINE CUFF in half, matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Bên phải cùng nhau.

Pin and stitch in place and finish the seam allowance.

Download the Penny Sweater PDF Sewing Pattern here

cổ phiếu