STEP 1:
Jọwọ ka awọn titẹ sita ilana!
Ṣẹda awọn sokoto welt lori awọn ege iwaju. Tẹle ikẹkọ apo welt to wa tabi wa nibi: https://www.the-tailoress.com/product/welt-pockets-pdf-sewing-pattern/
STEP 2:
Pẹlu awọn seése ti ko tọ si mejeji soke, agbo pada 1cm ti ọkan opin. Agbo pada 5mm pẹlú mejeji ti gun mejeji ki o si tẹ. Ki o si agbo awọn tai ni idaji concealing awọn aise egbegbe tẹlẹ wa ni tan-ni. Aranpo ni ibi.
Ọkan opin yoo wa nibe a aise eti, yi yoo wa ni sewn sinu aṣọ ẹgbẹ pelu.
STEP 3:
Agbo awọn kola ọtun mejeji jọ lengthways. Ran awọn isalẹ pelu ọsan jọ. Agekuru awọn igun ati ki o gee awọn pelu ọsan. Tan ọtun mejeji jade ki o si tẹ.
STEP 4:
Dubulẹ ni iwaju ati pada ọtun ẹgbẹ jọ. PIN ati aranpo ejika pelu ọsan.
Tun fun awọn miiran apa.
STEP 5:
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK pieces. Matching the underarm points.
Pin and stitch the seam allowance between the underarm points.
Tẹ awọn pelu ìmọ. Repeat for the other SLEEVE.
STEP 6:
With the garment WRONG SIDES out, match the SLEEVE seam allowances and the side seams of the FRONT and BACK.
Insert the TIE at the tie insertion point of the side seam on one side. Insert it between the FRONT and BACK so that it is visible on the RIGHT SIDE of the garment once sewn.
Pin and stitch the SLEEVE from the underarm point at the sleeve opening, around the curve to the lowest inside point of the SLEEVE. Finish the seam allowances by clipping the curved edge and trimming to 7mm.
Pin and stitch the side seam from the underarm point to the hemline. Turn RIGHT SIDES out and press the seams allowances.
STEP 7:
With the RIGHT SIDES out, pin the COLLAR around the centre front and neckline of the FRONT and BACK.
Pin the remaining TIE at the tie insertion point on the opposite side to where the side seam TIE is placed, on the centre FRONT.
Stitch just within the seam allowance.
STEP 8:
Follow Steps 4-6 to create the lining, ignoring references to the TIES and there’s no need to clip the SLEEVE seam allowance.
STEP 9:
Arrange the lining RIGHT SIDES together with the main garment. Pin and stitch around the centre front opening, including the COLLAR.
Aranpo ni ibi.
Tan ọtun mejeji jade ki o si tẹ.
STEP 10:
Turn back the seam allowances of the SLEEVE at both openings. Secure with small hand stitches. Press.
Turn up the main garment hemline 1 inch / 2.5cms and press. Turn up the lining hemline the same amount and pin. Sew together using hem stitch.