Joey Tee Tutorial
[printfriendly]
Images wa o si wa ninu awọn Àpẹẹrẹ download.
[wc_accordion collapse=”0″ leaveopen=”0″ class=”” layout=”box”]
[wc_accordion_section title=”Step 1″]
Cut out all pieces marking any balance or ease marks. This garment will have reasonable stretch to it so it is recommended to use zig-zag stitch wherever a seam is constructed.
Lay the front edge of the SLEEVE armhole to the FRONT armhole, Awọn ẹgbẹ ọtun papọ.
PIN ati aranpo awọn pelu alawansi.
Repeat for the other FRONT side.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.
PIN ati aranpo awọn pelu alawansi.
Repeat for the other BACK side.
Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Trim if necessary.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Pẹlu awọn ara ti ko tọ si awọn ẹgbẹ jade, align the side seams and SLEEVE seams.
Pin and stitch continuously from SLEEVE cuff to the garment hem.
Finish the seam allowances as before.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
LAISI HOOD:
Fold in half the NECK CUFF RIGHT SIDES together and sew the short seam allowance.
Fold the NECK CUFF in half so that the raw edges meet.
Ease around the garment neckline. Pin ati aranpo ni ibi.
For HOOD see Steps 5-7.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
PẸLU HOOD:
Dubulẹ meji Hood ona ọtun mejeji jọ. PIN ati aranpo aarin pada pelu alawansi. Gee ki o si pari awọn pelu alawansi pẹlu zig-Zag aranpo tabi ẹya overlocking aranpo.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. PIN ati aranpo ni ibi lati pari awọn pelu.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.
PIN ati aranpo. Pari iyọọda okun.
You may like to top-stitch the seam allowance flat towards the bottom of the garment.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Complete the garment hem and cuffs by finishing the seam allowance, then folding it back 1.5cm and top-stitching to secure.
Press all seams.
[/wc_accordion_section]
[/wc_accordion]