STEP 1:
1.5cm pelu alawansi to wa
Ge gbogbo awọn ege apẹrẹ kuro. Awọn CUFFS yoo ran dara ti o ba ti se lati Jersey.
Ṣe agbo ẹsẹ CUFFS ni awọn ọna gigun ni idaji. Baramu awọn egbegbe aise ti ọkan pẹlu awọn ti FRONT 1, Awọn ẹgbẹ ọtun papọ.
Pin ati aranpo ni ibi. Tun fun Iwaju 2.
Lo aranpo zig-zag tabi aranpo isan miiran jakejado iṣẹ akanṣe yii. Tun rii daju lati lo abẹrẹ ẹrọ jaisie ballpoint kan.
STEP 2:
With FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.
Pin in place.
STEP 3:
Dubulẹ iwaju 1 & 2 RIGHT SIDES together with the BACK. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.
Aranpo ni ibi. Repeat for the opposite side.
STEP 4:
Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.
Skip to step 10 for neck warmer or step 13 for hood.
STEP 5:
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Awọn ẹgbẹ ọtun papọ.
Pin and stitch in place and finish the seam allowance.
STEP 6:
Apply the HEM CUFF to the garment hem, Awọn ẹgbẹ ọtun papọ.
Ease around evenly then pin and stitch in place.
Finish the seam allowance.
STEP 7:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
STEP 8:
Sew the raw edges together.
STEP 9:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. PIN ati aranpo.
STEP 10:
Lay the HOOD pieces RIGHT SIDES together. Pin and stitch around the outside seam line.
STEP 11:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
STEP 12:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.