Penny Sweater Tutorial


Ge gbogbo awọn ege apẹrẹ kuro.
Ṣe agbo SLEEVE CUFF ni idaji pẹlu iwọn rẹ. Baramu awọn egbegbe aise ti CUFF ti a ṣe pọ si SLEEVE.

Irọrun (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. PIN ati aranpo.


Take the HEM CUFF and NECKLINE CUFF (refer to Step 5 if you are using the NECK WARMER CUFF) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.


Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.

Pin ati aranpo ni ibi.


Match the FRONT to the front side of the SLEEVE. Pin and stitch as before.

Repeat STEP 3-4 for the other side of the garment.


Dubulẹ ni iwaju ati pada ọtun ẹgbẹ jọ, pin from the side seam from the SLEEVE CUFF down to the garment hem.

Rann ki o si pari awọn pelu alawansi.

Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary


Apply the HEM CUFF to the garment hem, Awọn ẹgbẹ ọtun papọ. Match the centre front and back points.

Ease around evenly then pin and stitch in place.

Finish the seam allowance.


Skip to Step 10 if you are using the NECK WARMER or Step 13 for the NECKLINE CUFF.

Lay the HOOD pieces RIGHT SIDES together. Pin and stitch around the outside seam line.


Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.


Overlap the two seam allowances of the HOOD CUFF so one is behind then other. Apply the centre of the HOOD CUFF to the centre front of the garment.

Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.

STEP 10:

Fold the NECK WARMER CUFF in half along the centre fold line.

STEP 11:

Sew the raw edges together.

STEP 12:

Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.

Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. PIN ati aranpo.

STEP 13:

Fold the NECKLINE CUFF in half, matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Awọn ẹgbẹ ọtun papọ.

Pin and stitch in place and finish the seam allowance.