Bunny – Playsuit aso pajama PDF Àpẹẹrẹ
Create a super cute and amazingly comfortable all-in-one playsuit / sleepsuit / costume for your little one. Follow clear step by step instructions and have the option to simply adapt your playsuit for younger children with a removable hood and front and leg openings. So popular with children of all ages!
Rira a Àpẹẹrẹ ni rorun!
- Fi awọn ọja lati rẹ fun rira nipa tite 'kun fun rira' Bọtini
- Tẹ awọn alaye rẹ ninu awọn isanwo
- Tẹ awọn 'tẹsiwaju si PayPal' bọtini
- Buwolu wọle lati rẹ PayPal àkọọlẹ tabi yan lati ibi isanwo bi a alejo
- Ṣe awọn owo lilo rẹ afihan ọna
Lọgan ti rẹ owo jẹ pari, eyi ti deede gba to nikan kan diẹ aaya, o yoo wa ni darí pada si The Tailoress® nibi ti o ti le wo rẹ ibere ni mi Account (ti o ba ti o ba tẹlẹ ní ọkan tabi yan lati ṣẹda ọkan ni ibi isanwo). Lati àkọọlẹ rẹ agbegbe ti o tun le gba awọn faili rẹ. Lori owo ti o yoo tun gba ohun iwifunnii imeeli lati jẹ ki o mọ ibere re alaye Kó atẹle nipa miiran imeeli ti o ni awọn rẹ download ọna asopọ.
PayPal ni a ailewu ati ni aabo ọna ti rira lori ayelujara. O ko nilo a PayPal iroyin lati ra lati The Tailoress®.
Àpẹẹrẹ ba wa ni bi a fullscale copyshop PDF iwe eyi ti o le wa ni tejede lori eyikeyi iwọn iwe nipa lilo Adobe Reader to panini si ta. Tun wa dà soke pẹlẹpẹlẹ A4 ojúewé. Awọn lọtọ A4 ojúewé ni iwe awọn nọmba ati awọn asami lati ran o mö kọọkan iwe ti tọ lẹhin ti titẹ sita.
Jọwọ wo awọn titẹ sita ilana lati wa jade bi o si parí sita rẹ Àpẹẹrẹ lati asekale.
0-2: Copyshop iwọn: 60cm x 80cm / A4: 12 / US Iwe: 12
3-8: Copyshop iwọn: 68cm x 173cm / A4: 20 / US Iwe: 20
9-14: Copyshop iwọn: 71cm x 153cm / A4: 24 / US Iwe: 24
Jọwọ se akiyesi pe gbogbo Àpẹẹrẹ gbigba lati ayelujara ni o wa ni English, sibẹsibẹ o le wo awọn tutorial nibi ni rẹ yàn ede nipa yiyan rẹ afihan ede nipa tite “pese” ni awọn oke ọtun ti eyikeyi iwe ati yiyan rẹ afihan ede lati awọn ju si isalẹ akojọ.
Bunny Rabbit Costume Playsuit Pyjama Tutorial
Cut out all pieces marking any balance marks using tailor’s tacks.
Use a ballpoint sewing machine needle on a medium size stitch.
Match the front and back shoulder seams and pin and stitch,
Trim the seam allowance then overlock or zig-zag the seam. From now on this will be referred to as “finishing” the seam allowance.
Ease the sleeve into the armhole.
Start by pinning the centre of the sleeve to the shoulder seam. Then pin to either side of the armhole then ease the rest into the armhole. Finish the seam.
Lay the Front and back garments of the garment Right Sides together.
Pin from the sleeve cuff down to the the leg cut. Ensure to match the underarm seams.
Stitch and finish the seams.
Turn to the “Adaptation for Young Children Tutorial” now if you want to create this pattern with a detachable hood with front and leg opening.
Finish the seam allowance of the Centre Front down to the crotch.
Pin the inside leg seams from leg cuff to crotch.
Stitch and finish the seam allowance.
Turn one half of the garment Right Side out. Insert this half’s leg into the other which should be Wrong Sides out.
Pin the Centre Front and Centre Back seam allowance together all the way down the front and up the back of the garment including the crotch.
Stitch normally until you reach the Zip End marker. Then do a couple of backstitches and switch to a larger stitch. Continue along the seam allowance with the larger stitch.
Finish the seam allowance up until the Zip End marker.
Open up the garment with WS out and lay flat. Open up the Centre Front seam allowance and lay the zip onto it. Pin the zip to the seam allowances (not the garment).
Use a zip foot and stitch the zip to the seam allowances.
Take the cuffing pieces and stitch together the seam allowances to create tubes.
Fold the cuffing in half and ease around the corresponding sleeve and leg ends, RS facing.
Pin, stitch and finish.
Carefully open up the CF seam to the Zip End mark.
Create the ears by folding in half RS together. Pin then stitch the darts. Trim the seam allowance.
Lay the inner and outer ear pieces RS together. Pin and stitch the outer seam allowances together.
Pin Outer Hood 1 to Outer Hood 2 RS together. Insert the ear matching its centre to the Ear Insertion Point.
Lay the Inner Hood pieces RS together and pin. Lay the Outer Hood pieces RS together and pin.
Stitch and trim the seam allowances.
Place the Inner and Outer hoods inside one another. Pin the seam allowance along the hood opening and stitch.
Trim the seam allowance of the hood opening.
Clip the cross section of the Hood seam allowances
, within the seam allowance
This enable it to lay flatter when turned to the RS.
Turn the hood RS out and pin the hood opening seam flat.
To stitch close to the edge of the opening.
Also stitch a row approx. 5cm long across the centre semaphore Hood 1 and Hood 2 meet to keep the hood steady during wear.
Pin the Hood neckline onto the neckline of the playsuit, match centre seams and end points then ease the rest in.
Grade the neckline seam allowance leaving the Inner Hood seam allowance the longest so it conceals the others.
Clip the seam cross sections as in Step 20.
RS facing, pin the neckline seam allowance down and top stitch the neckline.
To make the Tail
, pin and stitch all the darts
Turn RS out.
At this point you may choose to stuff the tail with wadding or other material, although it is not necessary.
Cut a small piece of velcro approx. 2cm long.
Pin and stitch the softer part to the garment at the Tail Insertion point.
Pin and stitch the coarser part to the tail, covering the small opening.
Clip the seam cross sections as in Step 20.
Purchase the Bunny Costume in sizes 0-2 years here
Purchase the Bunny Costume in sizes 3-8 years here
Purchase the Bunny Costume in sizes 9-14 years here