Gabriella Jumpsuit Tutorial

Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

Images are available in the pattern download.

1.5cm seam allowance included
Cut out all the pattern pieces.

Fold the TIE LOOPS in half as shown on the pattern piece. Stitch and cut along the CUTLINE.

Fold the WAISTBAND LOOP in half as shown on the pattern piece and stitch.

Turn the TIE LOOPS and WAISTBAND LOOP RIGHT SIDES OUT. 出版社.

Lay the FRONT RIGHT SIDES together with the BACK.

Pin and stitch the side seam allowances.

Finish the seam allowance using zig-zags stitch or an overlocker.

Finish the underarm and neckline sections. The above diagram shows the method of using a custom cut strip of bias. 如果你使用準備好嘅偏差, 請根據你嘅偏置寬度進行調整. 自定義偏差令你嘅約. 4.5厘米 x 50cm 長的袖孔同 4.5cm x 30cm 長的領口接缝津貼.

將偏置條固定喺腋下部分. 縫合1.5cm 接缝余量.
將接缝余量修剪到約7.5mm.
係偏置的外邊緣上拗1cm.
在原始邊緣周圍拗偏置條以隱藏. 在錯誤的一側固定到位. 使用手縫, 如滑針, 以確保地方或緝緊明線裝飾接近接縫線的偏差.

將呔環对折, 並將原始邊緣與成衣的未完成肩部對正.

針腳同針腳. 頂部縫合接缝余量平.

正面同背面嘅褲件, 並奠定右兩側喺埋一齊.

針, 縫合和完成側車余量.

為另一邊重複.

將條褲插入另一個, 右兩側一起.

對正襠車余量.

針, 縫合和完成開始在任中心前或後, 繼續同對面嘅中心.

帶長褲袖口同鬆緊褲頭.

半縱向摺疊, 車車余量.

嚮右轉.

透過重疊接缝余量和縫合嚟帶彈性長度以創建圓角.

將袖口折成兩半, 以匹配原始邊緣.

在織物層之間插入袖口彈性, 隱瞞佢.

將袖口的毛邊同褲腳末端對正. 針腳同針腳到位. 像以前一樣完成接缝余量.

對另一條腿重複.

將鬆緊褲頭对折半, 匹配原始邊.

在图层之間插入腰帶彈性.

針同針腳的彈性腰帶右兩側同條褲腰圍.

縫內接缝余量允許行針被隱藏, 一旦前面和背面縫上.

將前面同後面嘅兩邊都弄錯了.

將腰圍與長褲和鬆緊褲頭相匹配.

將腰帶環摺疊成半部分, 然後將原始邊緣插入上部衫同條褲一側接缝之間嘅接缝余量。. (選擇你希望你條呔打喺另一邊).

針, 縫合和完成接缝余量.

將腰帶沿其寬度兩側折疊一半. 縫合接缝余量, 縫合一耑關閉, 但留下一個開放.

Turn the WAISTBAND RIGHT SIDES out through the open end.

Fold back the seam allowance of the open end and sew closed using a small hand stitch such as whip stitch.

Complete the garment by creating the TIES (follow the TIE & STRAP TUTORIAL) and inserting into the TIE LOOPS.

Download the Gabriella Jumpsuit PDF Sewing Pattern here

股票