步伐 1:
1.5cm seam allowance included
剪出所有圖案. The CUFFS will sew better if made from jersey.
Fold the LEG CUFFS in half lengthways. Match the raw edges of one with those of FRONT 1, 右兩側一起.
針腳同針腳到位. Repeat for FRONT 2.
喺呢個項目入面用雜曲縫或者其他彈性縫. 同埋確保用圓珠波衫機針.
步伐 2:
With FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.
Pin in place.
步伐 3:
Lay FRONT 1 & 2 RIGHT SIDES together with the BACK. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.
Stitch in place. Repeat for the opposite side.
步伐 4:
攞埋裙腳袖口同領口袖口 (如果用緊) 同埋將右邊摺埋一齊，形成一個連續嘅循環. 用固定同縫合短嘅縫隙.
Skip to step 10 for neck warmer or step 13 for hood.
步伐 5:
將領口袖口摺成兩半，襯埋生邊. 將領口袖口放喺領口開口周圍, 右兩側一起.
用釘同縫合到位，然後完成縫隙.
步伐 6:
將裙腳 CUFF 搽喺衣物裙腳, 右兩側一起.
均勻咁放鬆，然後用釘同縫合到位.
完成縫隙津貼.
步伐 7:
用緊個頸暖器
沿住中心摺線將頸部暖身袖口摺成兩半.
步伐 8:
將啲生嘅邊緣縫埋一齊.
步伐 9:
撳開縫份. 將頸保暖袖摺返上去，隱藏啱啱縫嘅縫隙，並創造一個完整嘅雙層布料環.
喺 NECKWARMER 同主要衣物領口上面搵中間前面同中間後面嘅位置. 將頸暖器嘅生邊同衣物領口襯埋一齊. 針腳同針腳.
步伐 10:
將引擎罩嘅右邊放埋一齊. 喺外縫線周圍固定同縫合.
步伐 11:
攞個引擎蓋袖口, 將佢摺成兩半，配合最長嘅縫隙. 將同縫合到引擎罩開口.
步伐 12:
將引擎罩 CUFF 嘅兩個縫隙重疊，噉樣一個就喺另一個後面. 將 HOOD CUFF 嘅中心搽喺衣物嘅中心前面.
將 HOOD 嘅中心背面同衣物嘅中心背面配對. 喺周圍用固定同縫合.