步伐 1:
剪出所有圖案.
將袖袖沿住佢嘅闊度摺成兩半. 將摺咗嘅 CUFF 嘅原始邊緣同套筒配對.
輕鬆 (伸展足夠嘅 CUFF ，令到佢可以由一邊伸到另一邊) 喺套筒嘅尾端. 針腳同針腳.
步伐 2:
攞埋裙腳袖口同領口袖口 (參考步驟 5 if you are using the NECK WARMER CUFF) 同埋將右邊摺埋一齊，形成一個連續嘅循環. 用固定同縫合短嘅縫隙.
步伐 3:
將袖嘅背面同後面嘅右邊一齊配對.
針腳同針腳到位.
步伐 4:
將 FRONT 同套嘅前面配對. 同之前一樣釘同縫.
重複步驟 3-4 喺衣服嘅另一邊.
步伐 5:
Lay the FRONT and BACK RIGHT SIDES together, pin from the side seam from the SLEEVE CUFF down to the garment hem.
Stitch and finish the seam allowance.
喺腋下點夾到差唔多到縫隙，等衣物一轉就平放. 如果你已經完成咗接近身體嘅縫隙津貼，呢個可能唔需要
步伐 6:
將裙腳 CUFF 搽喺衣物裙腳, 右兩側一起. Match the centre front and back points.
均勻咁放鬆，然後用釘同縫合到位.
完成縫隙津貼.
步伐 7:
Skip to Step 10 if you are using the NECK WARMER or Step 13 for the NECKLINE CUFF.
將引擎罩嘅右邊放埋一齊. 喺外縫線周圍固定同縫合.
步伐 8:
攞個引擎蓋袖口, 將佢摺成兩半，配合最長嘅縫隙. 將同縫合到引擎罩開口.
步伐 9:
Overlap the two seam allowances of the HOOD CUFF so one is behind then other. 將 HOOD CUFF 嘅中心搽喺衣物嘅中心前面.
將 HOOD 嘅中心背面同衣物嘅中心背面配對. 喺周圍用固定同縫合.
步伐 10:
沿住中心摺線將頸部暖身袖口摺成兩半.
步伐 11:
將啲生嘅邊緣縫埋一齊.
步伐 12:
撳開縫份. 將頸保暖袖摺返上去，隱藏啱啱縫嘅縫隙，並創造一個完整嘅雙層布料環.
喺 NECKWARMER 同主要衣物領口上面搵中間前面同中間後面嘅位置. 將頸暖器嘅生邊同衣物領口襯埋一齊. 針腳同針腳.
步伐 13:
WITH NECKLINE CUFF
Fold the NECKLINE CUFF in half, 匹配原始邊. 將領口袖口放喺領口開口周圍, 右兩側一起.
用釘同縫合到位，然後完成縫隙.