豆袋凳PDF格局

Cut out all pieces. Begin by folding the darts in the Top Back piece. 針腳同針腳.

Pin the Top Back onto the top of the Bottom piece and stitch. Start by placing a pinning the centre then the edges, ease the rest in place.

Pin and stitch the centre front and centre top of the Side Panel pieces right sides together.

Pin and stitch the Back to the Side Panel. Begin pinning from the centre easing the rest around.

Pin the Bottom piece to the Side Panel and back pieces. Mark the placement for the zip. Start stitching at the end of the zip point securing with a backstitch. When you reach the start of the zip point secure with backstitch then change stitch size to large and secure the zip seam.

Pin and stitch the zip tape to the seam allowances between the marked area of the Side Panel and Bottom pieces. Use a zip foot to stitch close to the zipper. Ensure to leave the zip open a little to be able to access the temporary stitches.

Carefully unpick the temporary stitches and open up the zip. Turn bag right sides out and top stitch around the zipper on the right side of the fabric. Secure across the ends.

Take the top seat pieces that were previously joined and carefully pin them in place onto the lower part. Stitch.
Now pull the beanbag right sides out through the zip opening.

Repeat all previous steps to create an inner bag to hold the beans. Instead of marking for a large zip, mark for a small 20cm zip along the center front where the side panel and bottom pieces join. Then go ahead and fill up your beanbag!