1.5cm seam allowance included
Begin by cutting out all the pieces. Overlock or finish with zig-zag stitch the lower edge of the BACK and FRONT FACING pieces and the side seams from the FRONT and BACK.

Use zig-zag stitch or other stretch stitch throughout this project. Also ensure to use a ballpoint jersey machine needle.

Pin and stitch the armhole and neckline front facing to the front garment piece, 右兩側一起. Leave the shoulder seams unstitched. Repeat for the BACK FACING and BACK garment piece.

Clip and trim the seam allowances.

At the cross section where the facings and side seams meet, trim the seam allowances from the facings and cut a notch close to the seam line where the bulk of the seams cross.

Lay the FRONT garment onto the BACK garment right sides together. Open up the FACING pieces so you can stitch continuously top to bottom of the side seam easing the FRONT onto BACK. Stop at the top of the SLIT OPENING.

Fold over the seam allowances to form the SIDE SLIT and pin in place.

Top stitch the slit seam allowances and press. 重复步骤 6-7 for the hem.

Pin the shoulder seams RIGHT SIDES together. Stitch then trim and grade the seam allowance. Top stitch on the right side of the garment to secure.

Turn RIGHT SIDES out and press.

Top stitch close to the seam line all the way around the neckline and armholes to secure the FACING in place.

Complete the dress hem by creating a rolled hem, folding back 0.75mm then back again another 0.75.mm.

Pin in place and secure using zig-zag stitch (be very careful not to pull at the fabric more than necessary to avoid distorting it).