£ 0.00
贴边袋PDF车衫模式
This is a free pattern containing 3 styles and 4 sizes of welt pockets. Complete with a colour tutorial, you can easily print the right size for your project and easily add to any type of garment. Also with the option of including a zip.
贴边袋PDF车衫模式
This is a free pattern containing 3 styles and 4 sizes of welt pockets. Complete with a colour tutorial, you can easily print the right size for your project and easily add to any type of garment. Also with the option of including a zip. Pocket depths are approx. 14.5cm.
Pocket styles are:
Shaped
Round
Square
Pocket opening widths are:
12cm
15cm
18cm
21cm
購買模式好易!
付款完成之後, 通常只需要幾秒鐘, 你會被重定向回 tailoress®, 喺呢度你可以喺我個帳戶中查看您的訂單 (如果你已經有一個或選擇創建一個系找數). 你仲可以喺你嘅帳戶區域下載文件. 付款後, 你仲會收到一封電子郵件通知, 畀你知你嘅訂單詳細信息後不久, 另一封電子郵件包含您的下載連結.
paypal 係一種安全同穩陣嘅互聯網購買方法. 你不需要由 tailoress®購買 paypal 帳戶.
模式系一个全面嘅影印铺嘅PDF档案可以打印喺任何尺寸嘅纸张使用Adobe Reader嘅海报打印. 都可破碎到A4页. 单独嘅A4页有页码同识认嚟帮助你较正确后打印嘅每一页.
唔该检视 打印指令 要操出点准确噉打印出你图案嚟缩放.
12cm welt pockets
影印铺头佢: 17cm x 43cm
A4页: 2
15-21cm welt pockets
Copyshop max. 大小: 26cm x 43cm
A4页: 4
唔该注意，所有模式下载都系英文嘅, 但是, 您可以通過单击選擇首選語言嚟查看您所選語言嘅教程。 “翻译” at the top right of any page and selecting your preferred language from the drop down menu.
Begin by using tailor’s chalk or continuous speed tailor’s tack to mark out the placement of the pocket opening on the garment.
Lay the welt pocket piece Right Sides together with the garment and match up the pocket placements.
Hold in place by tacking as before.
Machine stitch the tacked pocket opening.
Using small sharp scissors, cut directly through the centre of the pocket piece and the garment fabric. Mitre the ends as shown.
Pull the pocket piece to the Wrong Side of the garment through the cut opening.
Arrange the pocket in place and flatten the opening by pressing.
The pocket has a 5mm welt on either side of the opening. To create, fold the lower part of the pocket up 5mm then fold back on itself again as shown. This welt will reach midway to the centre line of the pocket. Pin in place.
Repeat for the upper welt.
With the welts arranged neatly (check from the RS side that they meet equally and look even), secure temporarily with a basting stitch.
From the RS of the garment, diagonal baste the welt shut.
If you want to add a zip to the pocket, first diagonally baste the welts together.
Lay the zip RS together along the centre line of the welts. Pin and baste in place.
From the RS of the garment, top-stitch either around the outer edge of the welts or directly on top of the welts. For the latter, ensure to keep stitches very close to the seams.
Gently press.
On the WS of the garment, fold down the upper part of the pocket bag along the dashed line on the pattern piece and match edges with the lower.
針腳同針腳到位.
得已帮衬应该产品嘅客户可能会留个审查.
回顾
宜家都冇评论.