步伐 1:
Match two TOP pieces RIGHT SIDES together lining up the pleats.
Fold the pleats through both layers together and pin in place.
Pin and stitch the shoulder seam allowance. 出版社.
Repeat for the remaining two TOP pieces.
步伐 2:
Open up the TOP pieces RIGHT SIDE up.
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
步伐 3:
With the two TOP pieces RIGHT SIDES together, pin, stitch and finish the side seam allowance.
Repeat for the other two TOP pieces.
步伐 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
步伐 5:
Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.
Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.
返回頁首
Match the centre front and back of the TOP to the WAISTBAND. 針腳同針腳到位. Finish the seam allowance and press.
DRESS/JUMPSUIT
Arrange the TOP sections RIGHT SIDES together with the TROUSERS and WAISTBAND. Match side seams and centre front and back points.
針腳同針腳到位. Finish the seam allowance and press.
步伐 6:
將領帶沿住佢嘅長度右邊摺埋一齊. 喺中間放一段串. 縫過頂部，將串固定喺 TIE 上面. 固定同縫合縫隙. 小心噉拉條繩，將右邊嘅綁帶轉出嚟.
如果你有個轉圈器:
將 TIE 縱向摺成兩半，然後縫合縫隙. 用縫紉機將右邊轉出嚟.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Insert into the WAISTBAND to complete.
如果你有個粘合劑附件，你可以用佢嚟整你嘅領帶.