Amir Tee & 跳線教程

Amir Tee & 跳線教程

The Tailoress PDF Sewing Patterns - Amir Tee & Jumper Tutorial

圖像在模式可供下載.

READ THE PRINTING INSTRUCTIONS BEFORE PRINTING WWW.THE-TAILORESS.COM/PRINTING-INSTRUCTIONS
1.5包括厘米縫邊
剪下所有的圖案片.

沿肩縫的BACK一起打好FRONT右側.

引腳和針到位.

使用的鋸齒形縫合或其他伸縮針跡整個項目. 此外,還要確保使用圓珠筆針織機針.

SKIP TO STEP 4 FOR SLEEVE

開拓服裝與右側向上.

就拿腿箍件對折縱向.

緩解腿箍,以袖窿, 周圍均勻分佈它. 引腳和線跡.

完成接縫與邊機或鋸齒形縫合.

重複步驟 1 和 2 對於其他袖窿.

隨著服裝反面出來, 匹配確保對準褲邊側縫津貼.

針和縫合兩側的縫份. 完成縫像以前一樣.

折袖口半沿其寬度.

緩解到套筒的端. 引腳和線跡.

打開向你的正面和背面右側.

與正面和背面一起躺在套筒右側. 銷在側接縫的腋下點和套筒頭與肩點的中心. 緩解休息.

縫合並使用鋸齒形針跡或邊機完成縫邊.

隨著服裝反面出來, lay the FRONT and BACK RIGHT SIDES together.

銷, 縫, trim and finish from the SLEEVE CUFF to the hem along the side seam.

Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.

Take the HEM CUFF and NECKLINE CUFF (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) and fold in half RIGHT SIDES together to create a continuous loop. 針和縫合短縫份.

應用下擺袖口衣服下擺, 右側在一起.

緩解周圍均勻即可引腳和縫合到位.

完成縫.

USING THE NECKLINE CUFFSKIP TO STEP 10 FOR NECK WARMER, STEP 13 FOR HOOD.

Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, 右側在一起.

Pin and stitch in place and finish the seam allowance.

USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.

 

Sew the raw edges together.

Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.

Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. 引腳和線跡.

萊HOOD片的正面合在一起. Pin and stitch around the outside seam line.

 

Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.

 

Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.

Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.

Download the *PRODUCT NAME* PDF Sewing Pattern here

分享