乔治平顶帽PDF缝纫花样

£ 4.03

明确
SKU: N / A 分类: , , , , , , , ,

描述

乔治平顶帽PDF缝纫花样

乔治平顶帽PDF缝纫花样

The George Flat Cap is a classic hat which is surprisingly straight forward to assemble. Create in any woven fabric, the sky’s the limit for what you could do with this pattern!

请查看 George Flat Cap 在这里或点击下面的标签在这个页面中打开.

打印说明 可以在这里找到

所有的模式都为满量程文件允许您打印不同尺寸的页面,以及A4和美国信纸大小的文档.

每次下载带有彩色图或照片教程. 您可以直接从您的帐户区或通过通过电子邮件发送您的具体下载链接来下载你的模式的时间无限量. 直接保存文件到您的计算机以供将来使用.

一个1.5厘米缝边包含所有样片,除非另有说明.

Available sizes are below, head circumference is in brackets.

儿童: 新生 (38cm /15″) / 3-6米 (45厘米 / 17.5″) / 6-12米 (47厘米 / 18.5″) / 幼儿 (50厘米 / 19.5″) / 儿童 (53.5厘米 / 21″)

成人: 小 (56厘米 / 22″) / 中 (58厘米 / 23″) / 大 (60厘米 / 23.5″) / extra large (62厘米 / 24,5″)


快速链接:

附加信息

帽子

Adult (S/M/L/XL), 儿童 (0-Tween)

采购的模式是很容易!

  • 通过点击“加入购物车”按钮将产品添加到您的购物车
  • 在结帐时输入的详细信息
  • 点击“前往PayPal”按钮
  • 登录到您的PayPal帐户或选择以访客身份结帐
  • 用你喜欢的方式进行支付
  • DONE!

一旦付款完成, 通常只需要几秒钟, 你会被重定向到Tailoress®在那里你可以在我的帐户查看订单 (如果你已经有一个或选择创建一个在结账). 从你的帐户区域中,您还可以下载你的文件. 在支付你也将收到电子邮件通知,让您知道您的订单细节不久后跟包含您的下载链接另一封电子邮件.

贝宝是购买在互联网上的安全和可靠的方法. 你不需要PayPal帐户从Tailoress®购买.

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

保存保存

保存保存

保存保存

保存保存保存保存

模式之际,它可以使用的Adobe Reader来打印海报​​大小的纸张上打印满刻度copyshop PDF文档. 也可打散到A4和美国信纸大小的页面. 单独的网页有页码和标记,以帮助您在打印后正确对齐每一页.

请查看 打印说明 要了解如何准确地打印您的模式扩展.

新生: Copyshop大小: 47cm x 21cm / A4页面: 3 / 美国信纸: 3

3-6M: Copyshop大小: 49cm x 21cm / A4页面: 3 / 美国信纸: 3

6-12M: Copyshop大小: 54cm x 23cm / A4页面: 3 / 美国信纸: 3

幼儿: Copyshop大小: 54cm x 23cm / A4页面: 3 / 美国信纸: 3

儿童: Copyshop大小: 57cm x 23cm / A4页面: 3 / 美国信纸: 3

小: Copyshop大小: 54厘米×30厘米 / A4页面: 6 / 美国信纸: 6

中: Copyshop大小: 72cm x 23cm / A4页面: 4 / 美国信纸: 4

大: Copyshop大小: 66cm x 26cm / A4页面: 4 / 美国信纸: 8

EXTRA LARGE: Copyshop大小: 72厘米×28厘米 / A4页面: 8 / 美国信纸: 8

请注意,所有模式的下载都是英文, 但是你可以通过点击选择你喜欢的语言在这里查看教程你选择的语言 “翻译” 在任何页面的右上角,并从下拉菜单中选择您的首选语言.

乔治平顶帽教程

乔治平顶帽教程

The Tailoress PDF Sewing Patterns - George Flat Cap Tutorial

The Tailoress PDF Sewing Patterns - George Flat Cap Tutorial

 

图像在模式可供下载.

5mm seam allowance included
剪下所有的图案片. Mark points A, B and C on the TOP and SIDE pieces using tailor’s tack, chalk or a dressmaker’s pen.

You may like to use interfacing (iron on or sew in) to strengthen the outer fabric. Simply cut one interfacing piece for the TOP and SIDE and iron on before continuing to the next step or sew together in Step 2.

Please note this pattern uses only a 5mm seam allowance.

Match points A, B and C of the TOP RIGHT SIDES together with the corresponding points on the SIDE.

Pin and stitch the 5mm seam allowance.

Clip the curved edges of the seam allowance to allow it to lay flat. Turn RIGHT SIDES out and topstitch the seam allowance to the TOP following the seam allowance all around.

With WRONG SIDES out, fold the dart on the TOP together.

引脚和线迹.

重复步骤 1-3 为衬里.

Lay the two BRIM pieces RIGHT SIDES together. Pin and stitch the larger curve.

转出右侧并按.

Insert the plastic inner BRIM piece between the fabric.

With the BRIM INSERT inside the BRIM, ensure to pull the BRIM tight over it.

PIn in place then stitch close to the edge of the BRIM INSERT to secure in place.

Cut the petersham tape length:
Length = hat size in cms + 3 厘米

Starting from the centre back seam line of the lining, pin the petersham tape around the main cap lining, leaving the 5mm seam allowance visible.

Fold 1cm of the tape under to neaten the edge when you complete the circle. Overlap the tape by 1cm.

Stitch the inner edge of the petersham tape to the lining.

Match the centre point of the BRIM to the centre front point (point B) of the main cap.

Pin and stitch the raw edge of the BRIM to the main cap.

Insert the lining WRONG SIDES together with the outer fabric of the cap.

Fold back the seam allowances so that they are hidden inside the cap behind the petersham tape.

Pin in place carefully, then stitch around the outer edge of the petersham tape directly to the main cap. You will need to pull back the upper part of the brim to avoid sewing through it. Sew only through the BRIM piece containing the BRIM INSERT and circumference of the cap.

Complete the cap by using small hand stitches to hold the TOP front of the cap to the BRIM. Approximately 15-20cms distributed around the centre front of the cap can be secured if desired.

Download the George Flat Cap PDF Sewing Pattern here

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

保存保存

保存保存

保存保存

保存保存保存保存

评测

没有评分.

只有登录的谁购买该产品可能会留下评论客户.



泳装

查看我们的泳衣图案范围
分享