加布里埃拉连衣教程
[打印友好]
图像在模式可供下载.
[wc_accordion 崩溃=”0″ 离开=”0″ 类=”” 布局=”盒子”]
[wc_accordion_section 标题=”第1步″]
1.5包括厘米缝边
剪下所有的图案片.
如图所示，将领带对折. 沿 CUTLINE 缝合和切割.
如图所示，将腰带环对折并缝合.
Turn the TIE LOOPS and WAISTBAND LOOP RIGHT SIDES OUT. 按.
[/wc_accordion_section]
[wc_accordion_section 标题=”第2步″]
与一起回来铺设前右侧.
Pin and stitch the side seam allowances.
Finish the seam allowance using zig-zags stitch or an overlocker.
[/wc_accordion_section]
[wc_accordion_section 标题=”步骤 3″]
Finish the underarm and neckline sections. 上图显示了使用自定义切割条偏置的方法. 如果您使用准备好的偏差，请适应您的偏差宽度. 对于自定义偏差，让你的大约. 4.5cm x 50cm long for the armholes and 4.5cm x 30cm long for the neckline seam allowances.
沿着腋下部分将偏置条固定到位. 缝合一1.5厘米缝.
将接缝余量修剪至约 7.5 毫米.
将偏置的外边缘折叠 1 厘米.
将偏置条折叠在原始边缘周围并隐藏起来. 固定在错误侧的适当位置. 使用手缝针迹（例如，滑针迹）将偏斜固定到位，或者将上线迹固定在接缝线附近.
[/wc_accordion_section]
[wc_accordion_section 标题=”第四步″]
将领带圈对折，将未加工的边缘与未完成的肩膀对齐.
引脚和线迹. 平缝线缝平整.
[/wc_accordion_section]
[wc_accordion_section 标题=”步骤 5″]
拿起前裤和后裤，将右脚放在一起.
销, 缝合并完成侧缝边.
重复另一侧.
[/wc_accordion_section]
[wc_accordion_section 标题=”步骤 6″]
将一个TROUSER插入另一个, 右侧在一起.
对齐the缝.
销, 从中心的正面或背面开始并一直延伸到相反的中心.
[/wc_accordion_section]
[wc_accordion_section 标题=”步骤 7″]
拿裤子裤和弹性腰带.
纵向对折并缝制缝制余量.
打开右侧出.
通过重叠接缝余量和缝线以创建圆形来准备弹性长度.
[/wc_accordion_section]
[wc_accordion_section 标题=”Step 8″]
Fold the CUFFS in half so as to match the raw edges.
Insert the cuff elastic between the fabric layers, concealing it.
Align the raw edges of the CUFF to the end of the TROUSER leg. 引脚和针到位. 完成缝像以前一样.
Repeat for the opposite leg.
[/wc_accordion_section]
[wc_accordion_section 标题=”Step 9″]
Fold the ELASTIC WAISTBAND in half, 毛边匹配.
Insert the waistband elastic between the layers.
Pin and stitch the ELASTIC WAISTBAND RIGHT SIDES together with the TROUSER waistline.
Stitch within the seam allowance to allow this row of stitches to be hidden once the FRONT and BACK are sewn on.
[/wc_accordion_section]
[wc_accordion_section 标题=”Step 10″]
Turn the FRONT and BACK WRONG SIDES out.
Match the waistline to that of the TROUSER and ELASTIC WAISTBAND.
Fold the WAISTBAND LOOP in half and insert the raw edges into the seam allowance between the upper garment and the TROUSER at one of the side seams. (Choose the opposite side to that which you want your tie to hang).
销, 缝合并完成缝份.
[/wc_accordion_section]
[wc_accordion_section 标题=”Step 11″]
Fold the WAISTBAND in half along its width RIGHT SIDES together. 缝制缝边, sew one end closed but leave one open.
Turn the WAISTBAND RIGHT SIDES out through the open end.
Fold back the seam allowance of the open end and sew closed using a small hand stitch such as whip stitch.
Complete the garment by creating the TIES (follow the TIE & STRAP教程) and inserting into the TIE LOOPS.
[/wc_accordion_section]
[/wc_手风琴]
Download the Gabriella Jumpsuit PDF Sewing Pattern here