Eloise Top & Dress Tutorial
[printfriendly]
Slike su dostupne u obrascu preuzimanje.
[wc_accordion collapse=”0″ leaveopen=”0″ class=”” layout=”kutija”]
[wc_accordion_section title=”Step 1″]
1.5cm šav dodatak uključen
Izrežite sve obrazac komada u.
Place the SHOULDER piece RIGHT SIDES together with the SHOULDER LINING.
Pin and stitch around the neckline and centre backs and along the shoulder seam allowances.
Clip and trim the curved seam allowances to allow them to lie flat once turned to the RIGHT SIDE.
Okrenite desnu stranu van i pritisnite.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Using a hand stitch or using the largest stitch on your machine, sew a line of straight stitch between the GATHER marks on the BACK piece. Sew midway along the seam allowance
Loop the thread in a figure of eight around a pin at one end then gently pull the thread to form the gathers. When you have gathered enough so the fabric fits between the GATHER marks on the SHOULDER piece, secure in a figure of eight around another pin.
Repeat for the FRONT.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Uz haljinu WRONG STRANE out, align the FRONT and BACK side seam allowances.
igla, prošiti i završiti.
pritisnuti.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
Završite sekcija SIDE pazuha. Gore dijagram pokazuje način pomoću posebno smanjiti traka pristranosti. Ako koristite spremni pristranost molimo prilagođavaju se vašim širine pristranosti. For custom bias make yours approx. 4.5cm x 30cm long, you will need 2.
Zakačili pristranost trake na mjestu duž pazuha sekciji. Stitch je 1.5cm šav dodatak.
Trim šav dodatak na oko 7.5mm.
Preklopite preko vanjskog ruba pristrasnosti 1cm.
Preklopite pristranost trake iznad i oko sirovog ruba da se sakrije. Pin in place on the WRONG SIDE. Use a hand stitch such as slip stitch to secure the bias in place or topstitch close to the seam line.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
Lay the FRONT and SHOULDER RIGHT SIDES together.
Pin i bodom. Remove the hand stitching that formed the gathers originally.
Finish the seam allowance using zig-zag stitch or an overlocker.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Ponovite korak 5 for the BACK and SHOULDER.
The SHOULDER centre back pieces will meet at the centre back of the BACK.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Complete the garment by adding a hook and eye or loop and button at the top centre back.
Finish the hem with a hemmer foot or create a rolled hem by hand.
[/wc_accordion_section]
[/wc_accordion]
Download the Eloise Top & Dress PDF Sewing Pattern here