STEP 1:
Si cogitas te uti ne transiliunt hanc gradus cucullo:
Cucullo ponere unum latus dextrum pieces. Pin fuere ac retro circa media tunica inconsutilis desuper et annonas ducatus.
Ensure to use a ballpoint jersey machine needle.
STEP 2:
Take COLAFUS vel fimbriam, fuere et dimidium in longitudinem et duplex mensuram implet ansam aptari.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
STEP 3:
Manica COLAFUS, in media latitudine per complicare.
Otium onto fine MANULEA. Pin and stitch.
STEP 4:
VERSUS repeat 3 nam cucullo COLAFUS.
Skip this Step if you are not using the HOOD.
STEP 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
Et in loco pin CONSUO.
STEP 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
STEP 7:
Et de vestimento HUMANES RESISTENTES UTRIMQUESECUS, lay the FRONT and BACK RIGHT SIDES together.
Pin, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.
STEP 8:
TEGILLUM:
Take cucullo. Aliudque COLAFUS sectiones inter se onto.
Par puncta media a fronte et ab tergo centrum cucullo pronao et postico ad sectiones. Medium tenens facere addens vestem acus punctis notare. Sic enim iterum inserere paxilli cum cucullo.
Et in loco pin CONSUO.
WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Et in loco pin CONSUO.
STEP 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. Et in loco pin CONSUO.