ຂັ້ນຕອນ 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, then fold it again back on itself 3cm.
Top stitch close to the edge on the RIGHT SIDE.
ຂັ້ນຕອນ 2:
Match the back SLEEVE armhole with the BACK, ເບື້ອງຂວາຮ່ວມກັນ.
Pin ແລະ stitch. Finish with either an overlocker or zig-zag stitch. Trim the seam allowance.
ຂັ້ນຕອນ 3:
Match the FRONT armhole with the front SLEEVE, ເບື້ອງຂວາຮ່ວມກັນ.
Pin, ປັກສໍາເລັດກ່ອນທີ່ຈະເປັນ.
ຂັ້ນຕອນຊ້ໍາ 1-2 ສໍາລັບ armhole ອື່ນໆ.
ຂັ້ນຕອນ 4:
Lay the FRONT RIGHT SIDES together with the BACK, matching the side seam and SLEEVE seam allowances.
Pin, stitch and finish.
Clip ເກືອບເຖິງການອະນຸຍາດ seam ຢູ່ຈຸດ underarm ເພື່ອອະນຸຍາດໃຫ້ເຄື່ອງຕັດຫຍິບເພື່ອຈັດວາງແປເມື່ອຫັນ. ຖ້າທ່ານໄດ້ສໍາເລັດການອະນຸຍາດ seam ໃກ້ຊິດກັບຮ່າງກາຍ, ນີ້ອາດຈະບໍ່ຈໍາເປັນ
ຂັ້ນຕອນ 5:
Finish the garment hemline using your preferred finishing method.
Turn the hemline towards the WRONG SIDE 1.5cm.
Topstitch to secure.
ຂັ້ນຕອນ 6:
Fold the length of the COLLAR in half RIGHT SIDES together.
Pin and stitch the two shorter ends. Clip the corners and trim down to 5mm.
Turn RIGHT SIDES out.
ຂັ້ນຕອນ 7:
Match the raw edges of the COLLAR around the garment opening.
Pin, stitch and finish.
Top stitch close to the seam from the RIGHT SIDE to secure the seam allowance flat.
ຂັ້ນຕອນ 8:
Lay the two WAISTBAND pieces RIGHT SIDES together.
Pin and stitch all around leaving a gap of approximately 10cm to turn right sides out.
Turn RIGHT SIDES out and press seams flat. Top stitch around the edges to hold flat and seal the 10cm opening.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
ຂັ້ນຕອນ 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.