ຂັ້ນຕອນ 1:
ຕັດອອກທັງຫມົດຕ່ອນຮູບແບບ.
Lay the main fabric and lining fabric RIGHT SIDES together of the bottoms.
Pin together. Stitch using zig-zag stitch or a stretch stitch on an overlocker.
Ensure to leave open the section for turning right sides out later.
Trim seam allowances.
ຂັ້ນຕອນ 2:
Turn RIGHT SIDES out.
Fold the seam allowances of the open section to the inside and sew using small whip stitches by hand.
ຂັ້ນຕອນ 3:
Fold the TIE LOOPS in half following the dashed line on the pattern piece.
Sew the seam allowance.
ເຮັດໃຫ້ດ້ານຂວາມີອອນໄລນ໌ seam ໃນການສູນກາງໃນການ.
ຂັ້ນຕອນ 4:
Lay the FRONT TOP main fabric and lining fabric RIGHT SIDES.
Pin together. Stitch.
Ensure to leave open the section for turning right sides out later and also the openings for the TIE LOOPS.
Trim seam allowances.
ຂັ້ນຕອນ 5:
Fold the TIE LOOPS in half lengthways matching the raw seam allowances. Insert the TIE LOOPS into the FRONT of the swimsuit, ລະຫວ່າງ fabric ໃນແລະນອກ.
Pin and stitch the seam allowances.
ຂັ້ນຕອນ 6:
Pull the swimsuit RIGHT SIDES out through the open sections on the top and bottoms.
ເທົ່ານັ້ນເອົາເງິນອຸດຫນູນ seam ຂອງການເປີດພາຍໃນ. ຮັບປະກັນການນໍາໃຊ້ຂະຫນາດນ້ອຍ, whip stitches.
ຂັ້ນຕອນ 7:
There are 3 options for completing the TIES.
ທາງເລືອກ 1: ພັບ TIE ໃນເຄິ່ງຫນຶ່ງຕາມຄວາມຍາວຂອງມັນຂວາຂ້າງຄຽງກັນ. ວາງຄວາມຍາວຂອງສາຍຢູ່ລະຫວ່າງ. Sew ຜ່ານທາງເທິງເພື່ອຮັບປະກັນສາຍກັບ TIE ໄດ້. Pin ແລະ sew ເງິນອຸດໜູນ seam. ດຶງເຊືອກຢ່າງລະມັດລະວັງຫັນ TIE RIGHT SIDES ອອກ.
ທາງເລືອກ 2: ຖ້າທ່ານມີ turner loop:
ພັບ TIE ໃນເຄິ່ງທາງຍາວແລະ sew ເງິນອຸດໜູນ seam ໄດ້. ເຮັດໃຫ້ເບື້ອງຂວາອອກໃຊ້ turner seam.
ທາງເລືອກ 3: ຖ້າທ່ານມີເອກະສານຕິດຂັດ, ທ່ານສາມາດນໍາໃຊ້ມັນດ້ວຍ stitch zig-zag ເພື່ອສ້າງສາຍພົວພັນຂອງທ່ານ.
Finish the TIE by turning the raw ends under twice and use small stitches to secure or by making a knot at each end. Insert one into each TIE LOOP to complete.