ແບບວາເລນຕິນາ 3 Tutorial

 

ຂັ້ນຕອນ 1:

ຕັດອອກທັງຫມົດຕ່ອນຮູບແບບ.

With the TOP pieces RIGHT SIDES together, pin ແລະ stitch ເງິນອຸດຫນູນ seam ຂ້າງ.

Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.

Mark and fold the pleats – making sure to mark with the side seams in the centre, stitch and press.

 

ຂັ້ນຕອນ 2:

Match each front pleat to its corresponding back pleat.

Sew across the join using a tight zig zag stitch.

 

ຂັ້ນຕອນ 3:

Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.

Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.

 

ຂັ້ນຕອນ 4:

Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.

Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.

 

ຂັ້ນຕອນ 5:

ວາງ WAISTBAND 1 ຂ້າງຂວາຮ່ວມກັບ WAISTBAND 2. Sew ເງິນອຸດໜູນ seam ເຖິງເຄື່ອງຫມາຍ. ພັບ ແລະກົດ WAISTBAND ໃນເຄິ່ງທາງຍາວ, ພ້ອມທີ່ຈະສະຫມັກ.

 

ຂັ້ນຕອນ 6:

Gather the waistline of the TOP to fit the WAISTBAND.

An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.

Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.

 

ຂັ້ນຕອນ 7:

ສໍາລັບການ Jumpsuit ຫຼື dress
ປະຕິບັດຕາມບົດສອນເພື່ອເຮັດໃຫ້ SKIRT ຫຼື TROUSERS.

ຈັບຄູ່ກາງທາງຫນ້າ, ເບື້ອງຫຼັງ ແລະດ້ານຂ້າງຂອງ TOP ແລະ SKIRT ຫຼື TROUSER RIGHT SIDES ຮ່ວມກັນ.

Pin ແລະ stitch. ສໍາເລັດການອະນຸຍາດ seam.

 

ຂັ້ນຕອນ 8:

ພັບ TIE ໃນເຄິ່ງຫນຶ່ງຕາມຄວາມຍາວຂອງມັນຂວາຂ້າງຄຽງກັນ. ວາງຄວາມຍາວຂອງສາຍຢູ່ລະຫວ່າງ. Sew ຜ່ານທາງເທິງເພື່ອຮັບປະກັນສາຍກັບ TIE ໄດ້. Pin ແລະ sew ເງິນອຸດໜູນ seam. ດຶງເຊືອກຢ່າງລະມັດລະວັງຫັນ TIE RIGHT SIDES ອອກ.

ຖ້າທ່ານມີ turner loop:
ພັບ TIE ໃນເຄິ່ງທາງຍາວແລະ sew ເງິນອຸດໜູນ seam ໄດ້. ເຮັດໃຫ້ເບື້ອງຂວາອອກໃຊ້ turner seam.

ສໍາເລັດ TIE ໂດຍການກົດມັນແລະຫັນປາຍດິບພາຍໃຕ້ສອງຄັ້ງແລະນໍາໃຊ້ stitches ຂະຫນາດນ້ອຍເພື່ອຮັບປະກັນ.. ໃສ່ເຂົ້າໄປໃນ WAISTBAND ເພື່ອເຮັດສໍາເລັດ.

ຖ້າທ່ານມີເອກະສານຕິດຂັດ, ທ່ານສາມາດນໍາໃຊ້ມັນດ້ວຍ stitch zig-zag ເພື່ອສ້າງສາຍພົວພັນຂອງທ່ານ.