ŽINGSNIS 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, then fold it again back on itself 3cm.
Top stitch close to the edge on the RIGHT SIDE.
ŽINGSNIS 2:
Match the back SLEEVE armhole with the BACK, Į dešinę puses kartu.
Prisegti ir dygsnio. Finish with either an overlocker or zig-zag stitch. Trim siūlės pašalpa.
ŽINGSNIS 3:
Match the FRONT armhole with the front SLEEVE, Į dešinę puses kartu.
kaištis, stitch and finish as before.
Pakartokite 1-2 už kitų Angos.
ŽINGSNIS 4:
Nustato priekyje dešinėje pusėse kartu su nugaros, matching the side seam and SLEEVE seam allowances.
kaištis, dygsnio ir užbaigti.
Susegkite beveik iki siūlės tarpo ties pažastų tašku, kad apvertus drabužį jis išsitiestų. Jei baigėte siūlę arti kūno, tai gali būti nereikalinga
ŽINGSNIS 5:
Finish the garment hemline using your preferred finishing method.
Turn the hemline towards the WRONG SIDE 1.5cm.
Topstitch to secure.
ŽINGSNIS 6:
Fold the length of the COLLAR in half RIGHT SIDES together.
Pin and stitch the two shorter ends. Clip the corners and trim down to 5mm.
Pasukite dešinėn pusių iš.
ŽINGSNIS 7:
Match the raw edges of the COLLAR around the garment opening.
kaištis, dygsnio ir užbaigti.
Top stitch close to the seam from the RIGHT SIDE to secure the seam allowance flat.
ŽINGSNIS 8:
Lay the two WAISTBAND pieces RIGHT SIDES together.
Pin and stitch all around leaving a gap of approximately 10cm to turn right sides out.
Turn RIGHT SIDES out and press seams flat. Top stitch around the edges to hold flat and seal the 10cm opening.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
ŽINGSNIS 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.