步 1:
在襯裡或主面料上創建貼邊口袋 正面圖案片.
Follow the welt pockets tutorial included.
步 2:
隨著領帶反面向上, 折回一端為1cm. 向後折疊5毫米沿兩個長邊，然後按. 然後對折隱藏毛邊預先接通在TIE. Stitch close to the seam edge.
一端仍將是毛邊, 這將被縫到衣服側縫中.
步 3:
縫頂部中央背縫在一起津貼. 按接縫開.
折疊領右側縱向在一起. 縫底縫在一起津貼. 剪輯的角落，修剪縫份. 轉出右側並按.
步 4:
萊正面和背面右側在一起. 針和縫合肩縫津貼.
重複另一側.
步 5:
Lay the SLEEVE along the FRONT and BACK matching the UNDERARM points.
引腳和線跡. 按開縫. 重複另一側.
Lay the SLEEVE along the FRONT and BACK matching the UNDERARM points.
引腳和線跡. 按開縫. 重複另一側.
步 6:
決定你想在和服重疊其前側. 側縫TIE將被插入到相對的側縫.
萊正面和背面右側在一起. Fold the SLEEVE RIGHT SIDES together as shown. Snip the FRONT side seam allowance at the underarm point to allow the SLEEVE seam allowance to lay open while the side seam lays together.
插入的TIE插入點的關係進入了邊縫津貼的一個.
引腳從袖子接縫點線圈的正面和背面下擺.
Clip the seam allowance almost to the seam line at the underarm point to allow it to lay flat once turned. 按接縫.
步 7:
針的剩餘TIE到TIE插入點在前面相對的另一TIE已經插入.
針腳衣領上背部領口和周圍在前面領終點匹配的接縫.
Sew a couple of mm within the seam allowance.
步 8:
重複步驟 4,5 和 6 為襯裡, ignoring the use of the TIES.
萊服裝主一起排隊右側.
Pin and stitch around the collar and centre front.
步 9:
Turn the main garment hemline and sleeve facings to the WRONG SIDE and press. Catch stitch by hand to secure.
隨著服裝右側出, fold the sleeve and hemline seam allowances of the lining to the inside and secure with catch stitch to the seam allowance of the facings.
重複開袖子接縫津貼.