步 1:
剪下所有裁片.
將 TOP 件 RIGHT SIDES 放在一起, 用別針縫合側縫餘量.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, stitch and press.
步 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
步 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
步 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
步 5:
鋪設腰帶 1 右側與腰帶一起 2. 將縫份縫到標記處. 將腰帶縱向折疊並壓成兩半, 準備申請.
步 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
步 7:
適用於連身褲或連身裙
按照教學製作裙子或褲子.
與前面的中心對齊, 上衣和裙子或褲子右側的背面和側縫在一起.
引腳和線跡. 完成縫.
步 8:
將領帶沿其長度右側對折. 在中間放置一段字串. 縫製頂部以將繩子固定在領帶上. 用別針固定並縫製縫份. 小心拉動繩子，將紮帶右側翻出.
如果你有一個循環翻轉器:
將領帶縱向對折並縫合縫邊. 打開右側出使用縫車工.
按壓領帶並將毛端翻轉兩次來完成領帶，並使用小縫線固定. 插入腰帶即可完成.
如果您有活頁夾附件，則可以將其與鋸齒形針跡一起使用來製作領帶.