步 1:
連身褲 – 從遵循頂級教程開始.
與 TROUSER RIGHT SIDES 一起, fold the leg in half using the cowl seam marker as reference for the center.
Stitch and finish the seam allowance of the cowl.
步 2:
With the TROUSER still RIGHT SIDES together match the inside leg seam allowances.
銷, 縫合並完成.
重複步驟 1-2 for the other TROUSER.
步 3:
Turn one TROUSER WRONG SIDES out. Place the other TROUSER inside and match the crotch seam allowances RIGHT SIDES together.
銷, 縫合並完成.
步 4:
鋪設腰帶 1 右側與腰帶一起 2. 將縫份縫到標記處. 將腰帶縱向折疊並壓成兩半, 準備申請.
步 5:
長褲 (for the jumpsuit, the WAISTBAND is added to the top)
Lay the TROUSERS RIGHT SIDES out.
Fold the WAISTBAND in half along its length.
Pin the WAISTBAND around the TROUSERS matching the centre of WAISTBAND 1 with the centre front.
縫, finish and press the seam allowance to the inside.
步 6:
Fold the LEG CUFF in half RIGHT SIDES TOGETHER matching the shorter ends together.
銷, stitch and press open.
Fold in half around its length and press.
Match the raw edges of the LEG CUFF and the TROUSER leg RIGHT SIDES together. 銷, 縫, finish and press the seam allowance toward the inside.
步 7:
將領帶沿其長度右側對折. 在中間放置一段字串. 縫製頂部以將繩子固定在領帶上. 用別針固定並縫製縫份. 小心拉動繩子，將紮帶右側翻出.
如果你有一個循環翻轉器:
將領帶縱向對折並縫合縫邊. 打開右側出使用縫車工.
按壓領帶並將毛端翻轉兩次來完成領帶，並使用小縫線固定. 插入腰帶即可完成.
如果您有活頁夾附件，則可以將其與鋸齒形針跡一起使用來製作領帶.
適用於連身褲或連身裙
與前面的中心對齊, back and side seams of the TOP and TROUSER RIGHT SIDES together.
引腳和線跡. 完成縫.
長褲
Complete by creating and inserting the tie.