Eloise Top & kiyim-tarbiyaviy
[bosma]
Tasvirlar namuna yuklab mavjud.
[wc_corcrion colps =”0″ Istopen =”0″ sinf =”” tartib =”quti”]
[wc_cordrion_seksiya sarlavhasi =”Step 1″]
1.5sm chok ruxsat kiritilgan
Barcha namuna dona kesib.
Elkama astar bilan birga elkama bo'lagini o`ng joylashtirish.
PIN va yoqa va markazi ortlariga atrofida va elka chok nafaqalar birga tikuv.
Clip and trim the curved seam allowances to allow them to lie flat once turned to the RIGHT SIDE.
O`ng chiqib va ochish.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 2″]
Using a hand stitch or using the largest stitch on your machine, sew a line of straight stitch between the GATHER marks on the BACK piece. Sew midway along the seam allowance
Loop the thread in a figure of eight around a pin at one end then gently pull the thread to form the gathers. When you have gathered enough so the fabric fits between the GATHER marks on the SHOULDER piece, secure in a figure of eight around another pin.
Repeat for the FRONT.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 3″]
amalga tikuvchilik yo'lga boshlovchi tomonlar bilan, align the FRONT and BACK side seam allowances.
Pin, tikuv va tugatish.
matbuot.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 4″]
Finish the SIDE underarm section. The above diagram shows the method of using a custom cut strip of bias. If you are using prepared bias please adapt to suit your bias width. For custom bias make yours approx. 4.5cm x 30cm long, you will need 2.
Pin the bias strip in place along the underarm section. Stitch a 1.5cm seam allowance.
Trim the seam allowance to about 7.5mm.
Fold over the outer edge of the bias by 1cm.
Fold the bias strip over and around the raw edge to conceal. Pin in place on the WRONG SIDE. Use a hand stitch such as slip stitch to secure the bias in place or topstitch close to the seam line.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 5″]
Lay the FRONT and SHOULDER RIGHT SIDES together.
PIN va chok. Remove the hand stitching that formed the gathers originally.
Finish the seam allowance using zig-zag stitch or an overlocker.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 6″]
Takrorlash QADAM 5 for the BACK and SHOULDER.
The SHOULDER centre back pieces will meet at the centre back of the BACK.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 7″]
Complete the garment by adding a hook and eye or loop and button at the top centre back.
Finish the hem with a hemmer foot or create a rolled hem by hand.
[/wc_accordion_section]
[/wc_accordion]
Download the Eloise Top & Dress PDF Sewing Pattern here