Qadam 1:
Iltimos, chop etish ko'rsatmalarini o'qing!
Oldingi qismlarda cho'ntaklar yarating. Welt cho'ntak qo'llanmasiga rioya qiling yoki uni shu yerdan toping: https://www.the-tailoress.com/product/welt-pockets-pdf-sewing-pattern/
Qadam 2:
BOG'LASHGAN TO'PLARI yuqoriga, bir uchidan 1 sm orqaga buking. Ikkala uzun tomoni bo'ylab 5 mm orqaga buking va bosing. Keyin galstukni yarmiga katlayın, avval ichkariga aylantirilgan xom qirralarni yashiring. joyda tikuv.
Bir uchi xom chekka bo'lib qoladi, bu kiyimning yon tikuviga tikiladi.
Qadam 3:
YOQA O‘NG YOQLARNI uzunasiga katlayın. Pastki tikuvlarni bir-biriga tikib qo'ying. Burchakni kesib oling va tikuv qismlarini kesib oling. O`ng chiqib va ochish.
Qadam 4:
OLDINI va ORQA OʻNG TOPLARIni birga qoʻying. Yelkaning tikuv qismlarini mahkamlang va tikib qo'ying.
Boshqa tomondan uchun takrorlang.
Qadam 5:
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK pieces. Matching the underarm points.
Pin and stitch the seam allowance between the underarm points.
Ochiq tikuvni bosing. Repeat for the other SLEEVE.
Qadam 6:
amalga tikuvchilik yo'lga boshlovchi tomonlar bilan, match the SLEEVE seam allowances and the side seams of the FRONT and BACK.
Insert the TIE at the tie insertion point of the side seam on one side. Insert it between the FRONT and BACK so that it is visible on the RIGHT SIDE of the garment once sewn.
Pin and stitch the SLEEVE from the underarm point at the sleeve opening, around the curve to the lowest inside point of the SLEEVE. Finish the seam allowances by clipping the curved edge and trimming to 7mm.
Pin and stitch the side seam from the underarm point to the hemline. Turn RIGHT SIDES out and press the seams allowances.
Qadam 7:
With the RIGHT SIDES out, pin the COLLAR around the centre front and neckline of the FRONT and BACK.
Pin the remaining TIE at the tie insertion point on the opposite side to where the side seam TIE is placed, on the centre FRONT.
Stitch just within the seam allowance.
Qadam 8:
Follow Steps 4-6 to create the lining, ignoring references to the TIES and there’s no need to clip the SLEEVE seam allowance.
Qadam 9:
Arrange the lining RIGHT SIDES together with the main garment. Pin and stitch around the centre front opening, including the COLLAR.
joyda tikuv.
O`ng chiqib va ochish.
Qadam 10:
Turn back the seam allowances of the SLEEVE at both openings. Secure with small hand stitches. matbuot.
Turn up the main garment hemline 1 inch / 2.5cms and press. Turn up the lining hemline the same amount and pin. Sew together using hem stitch.