Joey Tee Qo'llanma
[bosma]
Tasvirlar namuna yuklab mavjud.
[wc_corcrion colps =”0″ Istopen =”0″ sinf =”” tartib =”quti”]
[wc_cordrion_seksiya sarlavhasi =”Step 1″]
har qanday muvozanat yoki qulaylik belgili markirovka barcha qismlari kesib. Bu libos bir baxya barpo qaerda u-zag Zig tikuv foydalanish tavsiya etiladi, shuning uchun unga oqilona tortilishi bo'ladi.
OLDINGI armhole Sleeve armhole old chetini Lay, birgalikda o`ng.
PIN va chok puli tikuv.
Repeat for the other FRONT side.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 2″]
Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.
PIN va chok puli tikuv.
Repeat for the other BACK side.
Finish all sleeve seam allowances using an overlocker or zig-zag stitch. zarur bo'lsa, bezak.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 3″]
amalga tikuvchilik yo'lga boshlovchi tomonlar bilan, align the side seams and SLEEVE seams.
Pin and stitch continuously from SLEEVE cuff to the garment hem.
Finish the seam allowances as before.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 4″]
WITHOUT HOOD:
Fold in half the NECK CUFF RIGHT SIDES together and sew the short seam allowance.
Fold the NECK CUFF in half so that the raw edges meet.
Ease around the garment neckline. joyda Pin va chok.
For HOOD see Steps 5-7.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 5″]
Qaytarma qalpoqli BILAN:
Lay two HOOD pieces RIGHT SIDES together. Pin and stitch the center back seam allowance. Trim and finish the seam allowance with zig-zag stitch or an overlocking stitch.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 6″]
Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. Pin and stitch in place to finish the seam.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 7″]
Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.
PIN va chok. chok puli tugating.
You may like to top-stitch the seam allowance flat towards the bottom of the garment.
[/wc_accordion_section]
[wc_cordrion_seksiya sarlavhasi =”Step 8″]
Complete the garment hem and cuffs by finishing the seam allowance, then folding it back 1.5cm and top-stitching to secure.
barcha tikuv bosing.
[/wc_accordion_section]
[/wc_accordion]