Valentina Skirt Tutorial

 

HAPI 1:

Fold the SKIRT RIGHT SIDES together from the cowl centre point mark.

Gjilpere, stitch and finish the cowl seam.

 

HAPI 2:

Place both SKIRT pieces RIGHT SIDES together.

Match the centre back seam allowances.

Pin stitch and finish the seams.

 

HAPI 3:

Finish the hemline of both SKIRT pieces by creating a rolled hem.

Only complete the seam up until the centre front seam opening marker on the centre front.

 

HAPI 4:

Place both SKIRT pieces RIGHT SIDES together.

Match the centre front seam allowances.

Pin stitch and finish the seams.

 

HAPI 5:

Fold a small square of fabric in half and place under the centre front point where the skirt divides.

Top stitch around the V securing the square of fabric. This will support the centre seam line.

Trim away the excess.

 

HAPI 6:

Shtroj rripin e belit 1 ANËT E DJATHTA së bashku me rripin e belit 2. Qepni pjesët e qepjes deri në shënuesit. Palosni dhe shtypni rripin e belit në gjysmë për së gjati, gati për të aplikuar.

 

HAPI 7:

DRESS
Arrange the TOP sections RIGHT SIDES together with the SKIRT and WAISTBAND. Match side seams.

Pin in place ensuring no seam allowances have been missed out.

Qepni dhe përfundoni kufirin e tegelit.

SKIRT
Match the side seams and centre back/front of the WAISTBAND RIGHT SIDES together with the SKIRT. Pin dhe thur, finishing the seam allowance.

Press the seam allowances toward the inside of the garment.

 

HAPI 8:

Palosni kravatën në gjysmë përgjatë gjatësisë së saj ANËT E DJATHTA së bashku. Vendosni një gjatësi të vargut në mes. Qepni në të gjithë pjesën e sipërme për të siguruar fijen në kravatë. Mbajini dhe qepni pjesën e tegelit. Tërhiqeni me kujdes kordonin duke kthyer ANËT E DJATHTA TË KRAVETËS.

Nëse keni një rrotullues loop:
Palosni kravatën në gjysmë për së gjati dhe qepni pjesën e tegelit. Kthejeni anët e drejtë duke përdorur një shtresë Turner.

Përfundoni kravatën duke e shtypur dhe duke i kthyer skajet e papërpunuara nën dy herë dhe përdorni qepje të vogla për të siguruar. Futeni në brez për të përfunduar.

Nëse keni një lidhje lidhëse, mund ta përdorni me thurje zig-zag për të krijuar lidhjet tuaja.